NAYDJ 油浸/干式/充气式试验变压器

手机版 
手机网商汇
  • 您好,欢迎来到网商汇!
  • 登录
  • 注册
  • ,还可以通过
  • 使用QQ登陆使用新浪微博登陆使用微信登陆
  • 登录
所有类目仪器仪表网电工仪器仪表试验变压器

NAYDJ 油浸/干式/充气式试验变压器

价格面议
产品/服务
主营产品局部放电测试设备、高压试验变压器、高电压成套测量设备、高电压检测仪器、电缆和避雷器测试设备、微机继电保护测试设备、高精度分压器、接地和绝缘检测仪等。南澳电气(武汉)有限公司(简称“南澳电气”),主要从事电力检测设备、高电压试验研究、电力在线监测系统的研发,是早期国企改革后成立早的创新型重点生产单位之一,公司是集研发、设计和制造高电压输变电检测设备的高新骨干企业。
关键词
面向地区 全国

南澳电气(武汉)有限公司

认证
联系人刘强先生 (总监)
手机15327206266
联系电话027-87677658
联系地址中国 湖北省 武汉市 洪山区 关山街道 武汉市东湖高新技术开发区光谷大道60号光谷科技产业园8栋
网商汇会员 第2719

详情描述

NAYDJ Series Oil type/ Gas type/ Dry type Testing Transformer     NAYDJ 油浸/干式/充气式试验变压器
产品简介
NAYDJ系列油浸式/充气式/干式试验变压器(以下简称试变)又称升压器,它是发电站、供配电系统及科研单位等广大用户的基本试验设备。用于对各种电器产品、电气设备、绝缘材料等进行规定电压下的绝缘强度试验,考核产品的绝缘水平,发现被试品的绝缘缺陷,衡量承受过电压的能力。
产品特性
NAYDJ系列 油浸式试验变压器	
1、NAYDJ系列油浸式试验变压器选材优良,质量可靠,年稳定性好。
2、电压裕度大,电晕声小,局放小。
3、采用新式绝缘材料,体积小,重量轻。

NAYDJ Series Oil type/ Gas type/ Dry type Testing Transformer 
Product introduction
NAYDJ Series Oil immersed/ Inflatable / Dry Type Testing Transformer (Short for test transformers), also known as booster, it’s the power station, power supply and distribution systems, and research institutes, and other users  basic testing equipment. Used for a variety of electrical products, electrical equipment, insulation materials, etc. which under the specified voltage dielectric strength test, the insulation level of assessment products found to be defective insulation test to measure the ability of withstand over-voltage.
Also called name
High voltage withstand testing equipment; High voltage testing transformer; AC DC high voltage test device; AC/DC hipot test set; Cascade type high voltage testing transformer; Oil-immersed testing transformer; Oil type test transformer; Gas type test transformer, SF6 gas-typed test transformer, SF6 gas-insulated testing transformer; Dry type test transformer
The Characteristics of Series Oil type Testing Transformer	
1. Oil type test transformer selected reliable quality and good stability materials.
2. The voltage margin is high, corona sound is small, partial discharge is small.
3. Adopting modern insulating materials, small in size, light in weight


NAYDQ系列充气式试验变压器	
产品特性
1、NAYDQ系列充气式试验变压器体积小,重量轻(比同等级油浸试验变压器轻40%-65%)。
2、洁净,无油污,勿需维护。
3、不受恶劣气候环境影响,现场搬运勿须静止即可做试验。
4、绝缘强度明显高于油浸试验变压器,电晕极小。

采用SF6气体绝缘技术。油浸试变的换代产品,体积小、重量轻、不受气候环境变化影响,局部放电量极小,单台容量电压可达1000kVA/1000kV;现场运用勿静止、无油污、免维护、寿命长、性能指标始终良品等优点。产品为高级新产品和高级专利产品。特别适用于110kV及220kV等级的电力运行设备的局部放电测试。是新一代理想的高压试验装置。产品分金属体和绝缘筒外壳、单台与串级电压两种类型。特别适用于高寒、(高原)高海拨地区和环境使用。
?输出电压	50kV	100kV	150kV	200kV	250kV	300kV
??输入电压	200V	200V	400V	400V	400V	400V
??额定电压局放量	≤5pC	≤5pC	≤5pC	≤5pC	≤5pC	≤5pC
??阻抗电压	<8%	<8%	<8%	<10%	<10%	<10%
??空载电流	≤4%	≤4%	≤4%	≤5%	≤5%	≤5%
??波形畸变	<3%	<3%	<3%	<3%	<3%	<3%
??气体压力(Mpa)	0.4	0.4	0.5	0.5	0.5	0.5

NAYDQ Series Gas type Testing Transformer	
Product characteristics
1,The gas type testing transformer is in small size and light weight ( it is lighter 40% to 65% than the same level of oil-immersed testing transformer)
2,Clean, greaseless, do not need maintenance after use
3,Weather-proof , on site testing without standstill
4,The dielectric strength is higher than the oil type testing transformer, and the corona is minimal
Introduction of test transformer 
As the only one of applying the SF6 gas-isolated technology, it replaces the oil-immersed transformer by the small volume, light weight, stabilization, and little-current of partial discharge. The voltage capacity of single transformer can even reach 1000kVA/1000kV. It’s also environment-friendly, free of maintenance, long using term, and excellent performances.
As the national new product and patented product, it’s particularly applicable in partial discharge test of 110kV and 220kV electrical devices. And it’s the nanao electric company new generation of ideal high-voltage testing devices with two kinds of products, the metal & dielectric shell and the singe –stage & cascade voltage. It can also be used in the environment of cold and high latitude districts, like altiplanocie
Output voltage	50kV	100kV	150kV	200kV	250kV	300kV
Input voltage	200V	200V	400V	400V	400V	400V
Rated voltage of Partial discharge	≤5pC	≤5pC	≤5pC	≤5pC	≤5pC	≤5pC
Impedance voltage	<8%	<8%	<8%	<10%	<10%	<10%
No-load current	≤4%	≤4%	≤4%	≤5%	≤5%	≤5%
Waveform distortion	<3%	<3%	<3%	<3%	<3%	<3%
Air pressure(Mpa)	0.4	0.4	0.5	0.5	0.5	0.5

NAGTB系列干式试验变压器	
产品特性
1、NAGTB系列干式试验变压器体积小、重量轻、结构紧凑、无渗油,免于维护。
2、接线简单直观,使用方便。
3、绝缘可靠性好,外形美观。
4、NAGTB系列干式试验变压器有过电压保护功能。
NAGTB Series Dry type Testing Transformer	
Product characteristics
1,The dry type testing transformer is small and light , with compact structure, no oil leakage, and maintenance-free.
2,The connecting wire is simple and intuitive, easy to use
3,The insulation is reliability and with good appearance
4,The dry type testing transformer with over-voltage protection function

NAYDT 3C认证电器安规耐压试验仪
NAYDT 3C certification electrical pressure tester
一、概述:
国家"CCC"强制性认证机构认证产品质量监督和生产厂家执行认证质量检测低压电器设备的试验仪器装置。
NAYDT系列3C认证电器安规耐压试验仪是专为低压柜生产企业、电力电子行业、绝缘材料生产单位、电流电压互感器检测耐压试验而设计制造的。是上述单位质检部门检测产品合格的必备设备。该设备具有性能优越、使用安全可靠、外型结构美观、坚固耐用、移动方便等特点。
二、 技术参数:
输入电压:220V(0~200V)
电源频率:50Hz
容量:0.5、1、2、3、5(kVA)
输出电压:0~2500V/0~5000V/0~10000V(可调)
NAYDT series 3C authentication electrical safety pressure test instrument
Overview
The state "CCC" compulsory certification institutions authentication products quality supervision. Manufacturer and execute authentication quality testing low-voltage equipment test equipment device! NAYDT series 3C authentication electrical safety pressure test apparatus is designed for low ark production enterprise, power electronics industry, insulating material production units, current, voltage transformer testing withstand test and the design and manufacture.
Technical parameters
The input voltage: 220V (0 ~ 200V)
Power frequency: 50Hz
Capacity: 0.5, 1, 2, 3, 5 (kVA)
Output voltage: 0 ~ 2500V / 0 ~ 5000V / 0 ~ 10000V (adjustable)

其他试验变压器相关产品

更多>>

电工仪器仪表相关分类: